Brand Name
IN-LITE® EVO FLEX LED Strip Lights - 12v
Unhide your garden with in-lite®.
The in-lite® EVO FLEX strip light is specially designed to provide a completely frosted and glowing lighting effect without individual LEDs or "hot spots" being seen along the strip. This EVO FLEX strip light is available in lengths of 1m, 2m and 3m. Need a different length than the available sizes? No problem! Simply trim the EVO FLEX to the desired length using the cut-points located every 25mm along the strip. The flexibility of this product means that it's completely up to you how you use the EVO FLEX. After cutting, the MINI WATERLOCK that is supplied with each length can be used to re-seal the strip light to maintain the IP68 rating.
The magic of the EVO FLEX lies in its flexibility, making it possible to conform into virtually any possible shape. Whether your garden has straight lines or lots of organic shapes, the EVO FLEX fits in perfectly! Out of sight during the daytime, these fixtures create an exceptionally unique ambience after dark that is as artistic as it is functional.
There are a host of accessories available for a wide variety of installations: the SPIKE for ground mounting in soft ground, CLIPS for curved installation, two types of PROFILE for linear installation, CORNER INSIDE and CORNER OUTSIDE for bending the strip neatly round corners and finally FLEX-EXT CORD for extending the cable by 1m.
Each 12v in-lite® fitting features an LED with a 25,000 hour lifetime, giving you the peace of mind that they are built to last for years to come. They are covered under warranty for 5 years when used with the in-lite® system. Each light strip is supplied with one of their EASY-LOCK connectors for easily connecting to anywhere on the chosen in-lite® CBL 12v cable. The fitting is then easily connected to the EASY-LOCK using the push-fit connection. The provided EVO FLEX DRIVER 1 can then be connected in-line between the EASY-LOCK and the LED strip.
Note: When calculating the total transformer load within an in-lite® system it is crucial to add up the total VA rating rather than the wattage due to power losses. This VA load should not exceed the total stated on the chosen transformer.
Note: Due to the higher VA requirements of the EVO FLEX strip lights, in-lite® recommend placing the strip light no farther than 40m from the transformer whilst using the larger 10/2 gauge cable to ensure optimal operation.
The in-lite® EVO FLEX strip light is specially designed to provide a completely frosted and glowing lighting effect without individual LEDs or "hot spots" being seen along the strip. This EVO FLEX strip light is available in lengths of 1m, 2m and 3m. Need a different length than the available sizes? No problem! Simply trim the EVO FLEX to the desired length using the cut-points located every 25mm along the strip. The flexibility of this product means that it's completely up to you how you use the EVO FLEX. After cutting, the MINI WATERLOCK that is supplied with each length can be used to re-seal the strip light to maintain the IP68 rating.
The magic of the EVO FLEX lies in its flexibility, making it possible to conform into virtually any possible shape. Whether your garden has straight lines or lots of organic shapes, the EVO FLEX fits in perfectly! Out of sight during the daytime, these fixtures create an exceptionally unique ambience after dark that is as artistic as it is functional.
There are a host of accessories available for a wide variety of installations: the SPIKE for ground mounting in soft ground, CLIPS for curved installation, two types of PROFILE for linear installation, CORNER INSIDE and CORNER OUTSIDE for bending the strip neatly round corners and finally FLEX-EXT CORD for extending the cable by 1m.
Each 12v in-lite® fitting features an LED with a 25,000 hour lifetime, giving you the peace of mind that they are built to last for years to come. They are covered under warranty for 5 years when used with the in-lite® system. Each light strip is supplied with one of their EASY-LOCK connectors for easily connecting to anywhere on the chosen in-lite® CBL 12v cable. The fitting is then easily connected to the EASY-LOCK using the push-fit connection. The provided EVO FLEX DRIVER 1 can then be connected in-line between the EASY-LOCK and the LED strip.
Note: When calculating the total transformer load within an in-lite® system it is crucial to add up the total VA rating rather than the wattage due to power losses. This VA load should not exceed the total stated on the chosen transformer.
Note: Due to the higher VA requirements of the EVO FLEX strip lights, in-lite® recommend placing the strip light no farther than 40m from the transformer whilst using the larger 10/2 gauge cable to ensure optimal operation.
Specification
IN-LITE® EVO FLEX 1 LED strip - 1m - side bend - 12v - 9.9VA - w/white
Product Code: LIN8810
Dimensions: width 6.5mm; height 12mm; length 1000mm; cut-points located every 25mm (approx.)
Product Code: LIN8810
Dimensions: width 6.5mm; height 12mm; length 1000mm; cut-points located every 25mm (approx.)
IN-LITE® EVO FLEX 2 LED strip - 2m - side bend - 12v - 15.7VA - w/white
Product Code: LIN8812
Dimensions: width 6.5mm; height 12mm; length 2000mm; cut-points located every 25mm (approx.)
Product Code: LIN8812
Dimensions: width 6.5mm; height 12mm; length 2000mm; cut-points located every 25mm (approx.)
IN-LITE® EVO FLEX 3 LED strip - 3m - side bend - 12v - 20.2VA - w/white
Product Code: LIN8814
Dimensions: width 6.5mm; height 12mm; length 3000mm; cut-points located every 25mm (approx.)
Product Code: LIN8814
Dimensions: width 6.5mm; height 12mm; length 3000mm; cut-points located every 25mm (approx.)
