Collingwood LED Mini Deck Light Sets - s/steel - 24v
In recent years, Northampton based Collingwood Lighting have been designing and engineering some of the highest quality and most reliable outdoor light fittings on the market.
These Collingwood deck light sets are a fantastic addition to almost any lighting design or project and are hugely versatile and very cost effective. They are provided in sets, with each set containing 5 mini deck lights and a 5m starter cable. These deck lights are constructed from high quality stainless steel and boast a frosted lens that reduces glare when viewed from above and creates a soft lighting effect. The design of the fittings feature two separate cables: an input and output, both of which are 0.5m long, creating a maximum spacing of 1m between fittings as standard. Each cable has built-in twist connectors to allow fittings to be easily connected together.
Once connected up to one of our range of 24v outdoor power supplies
, the starter cable can be connected to the first mini deck light using the twist connectors. Up to a whopping 40 fittings can be connected together on a single line, with one power supply capable of powering multiple starter cables when wired using our parallel EasyTees
, so long as the total wattage does not exceed the rated load. The final fitting on any line should then be capped off using the provided end cap which simply threads onto the final twist connector, preserving the system's IP67 rating.
These versatile fittings can be used almost anywhere around the garden thanks to their relatively low wattage and low glare, but are especially suited for decking, marker lighting along paths or even steps. There are also 1m extension cables available to space each light further apart if necessary, and several extension cables can be connected together to extend this distance even further.
Dimensions: Ø of bezel 30mm; length of body 24mm; Ø of body 20mm (approx);
Collingwood mini deck light set of 5 - s/steel - frosted - 0.9w - 24v - w/white
Product Code: LGC4910
Power consumption per fitting 0.9w; cable length (input and output) 0.5m; colour temperature 3000k (w/white)