Aquascape Spillway Bowls, Basins & Stands - 82cm & 102cm
Aquascape "Fountainscape" System:
Water features add intrigue and movement to gardens, as well as the soothing sound of water. When done correctly they can be a real focal point of a garden design. The Aquascape "Fountainscape" system is designed to ensure consistent, reliable and long lasting water feature installations. The system consists of a AquaBasin water feature reservoir, which houses a pump that feeds water to a free standing feature placed on top of the reservoir. The water then cascades down the water feature before spilling back into the reservoir.Aquascapes Spillway Bowls, Basins & Stands:
The 82cm (32") Spillway Bowls feature a single spillway spout that can be used in a wide variety of applications. They can be used as a standalone feature with the water spilling straight back into the reservoir, or alternatively the spout can be directed into a second bowl, for example the larger Aquascape 102cm (40") water feature basin. They can even be used as a water feature at the edge of a pond with the spillway directing the water back to the pond, or at the top of a watercourse. Alternatively, the 102cm Spillway Basin can be used as a standalone water feature, with water cascading over the whole circumference of the bowl.
When installing a 82cm Spillway Bowl spilling into a 102cm Spillway Basin, the Spillway Bowl Stands should be used. This raises the height of the 82cm Spillway Bowl to enable it to direct water into the 102cm Spillway Basin. In this type of installation, the 102cm Spillway Basin should be located atop an Aquascape AquaBasin 45
The Aquascape Spillway Bowls, Basins and Stands are constructed from glass fibre reinforced concrete and as a result can vary in colour by up to 15% from bowl to bowl, giving every single one a unique aesthetic. After casting, each bowl is hand finished to provide a slightly uneven texture and pattern, further solidifying their individuality.
Aquascape recommend using the Ultra 8000 water feature pump
to feed these spillway bowls. If two bowls are being used together, it is best to use the splitter provided with this pump to divert the flow between both bowls. This helps to prevent turbulence within the bowl. The pipework from the pump is easily connected up to the bowl using the provided multi-stage hose tail for ¾", 1" or 1¼" (19mm, 25mm or 32mm) pipework (hose clips & pipework not included).
Also provided with each Spillway Bowl is a PVC riser with a PVC tee on the end. These PVC risers are coloured to match the bowl, and can be solvent welded in place to help slow the velocity of the water entering the bowl.
Each bowl contains a second inlet that is blanked by default. The blank-nut can be removed to enable cable entry into the bowl for the purpose of installing lighting as required. The provided rubber cable seal can then be used to create a water-tight seal against the cable to prevent water escaping from the bowl.
Aquascape Spillway Bowl with single spillway - glass fibre reinforced concrete - 82cm bowl (32")
Product Code: ASW5012
Diameter 820mm; Height 368mm
Aquascape Spillway Basin with 360° spillway - glass fibre reinforced concrete - 102cm basin (40")
Product Code: ASW5052
Diameter 1016mm; Height 406mm
Aquascape Spillway Bowl Stand - 10cm (4") tall - glass fibre reinforced concrete - 2 pack
Product Code: ASW5912
Length 343mm; Width 343mm; Height 102mm