IN-LITE® ANCHOR

The IN-LITE® ANCHOR is a simple accessory that allows you to mount any in-lite® fixture with a male threaded ground stake onto hard surfaces, for example, the SWAY. The ANCHOR can be installed directly onto wooden surfaces, or onto concrete and ceramic using a plug. This makes it perfect for adding lighting to decking, patios, or other solid areas where a standard ground stake is not suitable. Easy to install and highly versatile, the ANCHOR gives you the flexibility to securely place your in-lite® fixtures wherever you need them.

They can also be used for ceiling mounting of the VOQUE lanterns, creating a stunning lighting effect sure to stand out in any design.

If you're mounting into surface that require the plug, start by drilling a 10mm hole into the surface to suit the plug. The bottom part of the screw features a self-tapping end to make direct installation into wood far easier. To install the ANCHOR, use an electric drill with a 6mm hex bit. For more information, please refer to the Installation Guide PDF.

Dimensions: length of plug 38mm; plug diameter 10mm; length of bottom screw section 30mm; hex bit size 6mm