Brand Name
Hunter Wireless Valve Link Plug-In Modules (for ICC2 & HCC)
The Wireless Valve Link system is the newest technological innovation from industry leading Hunter Industries. Compatible with the ICC2 and HCC irrigation controllers, this system allows you to wirelessly control irrigation zones without the use of cable, massively saving on the cost of trenching and installation as well as allowing the system to be expanded in the future. Thanks to LoRa technology, the radio frequency can travel up to 650m (line-of-sight) which can be further doubled with the use of a signal booster, allowing them to be used for even the largest of residential projects.
The heart of the system is these WVL plug-in modules. These plug directly into one of the module sockets inside the ICC2 or HCC controllers, at which point the radio frequency is emitted. This module can control up to 54 stations, and can be added to existing multi-core or decoder systems (max. of 54 total stations per controller). This makes them a great solution for expanding existing systems without having to run extra cable. All programming is done via the Hunter WVL app through the user friendly interface.
These modules connect wirelessly to the 1, 2 or 4 station Wireless Valve Link Receivers, which are installed through the lid of the valve box. To make installation easier, each module is supplied with a 38mm core-drill attachment for drilling the perfectly sized hole in the valve box lid, every time. These receivers can be pre-programmed before final installation, where they can then be wired to the Hunter PGV latching 9v solenoids.
There is a range of accessories available for this system, such as the aforementioned Signal Repeaters for increasing the range of the radio frequency, Antenna Extension Kits for situations where the controller (and therefore antenna) is situated inside a metal enclosure or building, and finally the Solar Panel Kits for WVL Receivers which enable solar power to be used to power the Wireless Valve Link Receivers instead of the usual 9v batteries.
For installation and set-up information, please refer to the video and downloadable PDFs on this page.
The heart of the system is these WVL plug-in modules. These plug directly into one of the module sockets inside the ICC2 or HCC controllers, at which point the radio frequency is emitted. This module can control up to 54 stations, and can be added to existing multi-core or decoder systems (max. of 54 total stations per controller). This makes them a great solution for expanding existing systems without having to run extra cable. All programming is done via the Hunter WVL app through the user friendly interface.
These modules connect wirelessly to the 1, 2 or 4 station Wireless Valve Link Receivers, which are installed through the lid of the valve box. To make installation easier, each module is supplied with a 38mm core-drill attachment for drilling the perfectly sized hole in the valve box lid, every time. These receivers can be pre-programmed before final installation, where they can then be wired to the Hunter PGV latching 9v solenoids.
There is a range of accessories available for this system, such as the aforementioned Signal Repeaters for increasing the range of the radio frequency, Antenna Extension Kits for situations where the controller (and therefore antenna) is situated inside a metal enclosure or building, and finally the Solar Panel Kits for WVL Receivers which enable solar power to be used to power the Wireless Valve Link Receivers instead of the usual 9v batteries.
For installation and set-up information, please refer to the video and downloadable PDFs on this page.
Specification
Hunter Wireless Valve Link plug-in output module for ICC2 & HCC controllers (with 38mm holesaw)
Product Code: UNC2110
Product Code: UNC2110
Login