Oase LunAqua Connect M Controllable Pond Light Starter Sets - Warm White & RGB

The Oase LunAqua Connect system is Oase's most versatile and customisable outdoor lighting system to date. With options for warm white and RGB colour change lighting, and the capability to control the system via smartphone, there are options to suit every project and client's requirements.

The LunAqua Connect M Controllable Starter Sets are the perfect starting point for systems combining warm white and colour changing lighting. The set includes 1x 24v transformer (36w), 1x LunAqua Connect Easy Switch Smart Controller, 1x LunAqua Connect M Warm White 4w Spotlight, 1x LunAqua Connect M RGB 7.5w Spotlight, 2x light bases and stakes and 2x riser extension pieces.

The transformer is placed at the start of the system. They can be plugged into an outdoor plug socket to provide power to the system, before reducing the voltage down to 24v on the outlet side. 24v is still considered low-voltage and as such is non-lethal for humans and pets in the event of damage. The benefit of 24v power over the more frequently used 12v is the maximum run length before voltage drop occurs. Thanks to the 24v power source, the LunAqua Connect lights can be placed up to a maximum of 100 metres from the transformer. These transformers are rated for permanent outdoor use and are protected to IP67.

The provided LunAqua Connect Easy Switch Smart Controller allow the LunAqua Connect pond lights to be controlled via smartphone through the Oase Switch app. These controllers feature three outputs; 2 outlets for warm white circuits and 1 outlet for RGB (colour changing) fittings. These outlets can be independently switched through the app, light fittings dimmed to lower the light output, as well as changing the colour of the RGB lights. These IP44 controller units can be wall mounted and sit after the transformer in the system.

This set features a LunAqua Connect M Warm White Spotlight, and a LunAqua Connect M RGB Spotlight. Paired with these spotlights are a base and stake for each fitting, providing you with two mounting options for each light, as well as an extension piece for each light which increases the height of the riser if required. These lights are IP68 rated and can be permanently submerged underwater. Each light fitting has a 3m power cable.

The lights can be plugged directly into the controller, or extension cables can be used to increase the distance between the light fittings and the controller. Utilising the same quick-connect plug & play style connectors as the rest of the system, each connection is rated to IP67. As a result, these connections cannot be submerged underwater.

This starter set can be expanded upon through the use of splitters, extension cables and LunAqua Connect Solo light fittings, with the limiting factor being the wattage of the transformer.