IN-LITE® SWAY PENDANT TRIPLE Hanging Light Sets - 240v
Unhide your garden with in-lite®.
The mains voltage SWAY PENDANT hanging lights are a stunning way of softly lighting any outdoor dining table or seating area or on trees or pergolas. For a playful and interesting lighting effect, multiple SWAY PENDANT fixtures can be installed together at varying heights. The SWAY PENDANT lights should preferably be hung in a windless spot.
These SWAY PENDANT TRIPLE kits consist of three 240v SWAY PENDANT hanging lights, a triple splitter, a transformer and a BASE 1 for mounting. The transformer which powers the three fittings should be mounted within the BASE 1. The triple splitter can then be plugged into the outlet of the transformer, allowing you to power all three SWAY PENDANT hanging lights from the single transformer. The BASE 1 contains a mounting accessory that enables all three cables to be trailed through the same base, as well as setting the amount of cable trailed through for each hanging light. Each SWAY PENDANT has a secondary mounting accessory that can be screwed into place to set the location of the light. Instructions for installation can be found on the PDF Installation Guide on this page.
They are available with a Black finish as standard, or Pearl Grey upon request. We also offer a
single SWAY PENDANT kit for installation of just one SWAY PENDANT light.
These 240v versions do not require the in-lite® system and as such can be mixed and matched with other lights of your choosing. The mains powered version also features the in-lite® Human Dimming technology that enables dimming of the fixture using just the touch of your hands. Unlike the 12v in-lite® fixtures though, these do require installation by a certified electrician.
The SWAY PENDANT lights are compatible with the
SWAY PENDANT CAP. These caps simply clip over the light heads, directing more of the light downward and preventing outward light spill.
The
SWAY PENDANT TRIPLE hanging lights are also available in 12v format. The 12v version requires the in-lite® system and so cannot be mixed and matched with other brands.
Each in-lite® fitting features an LED with a 25,000 hour lifetime, giving you the peace of mind that they are built to last for years to come. They are covered under warranty for 5 years.
Specification
| Beam Angle |
98° |
| Cable Length |
2.2m |
| CRI Rating |
96 |
| Dimmable |
Yes |
| Guarantee |
5 Years |
| IP Rating |
IP55 |
| Lamp Life |
25,000h |
| Light Colour (Kelvin) |
2900k |
| Lumen Output |
92 lm |
| Power Consumption |
2.5w |
| Power Source |
240v Mains |
| Type of Light |
Ceiling Light |
| Type of Light |
Hanging Light |
| VA Load Rating |
3 x 7.1VA |
| Wiring Required |
Parallel |
IN-LITE® SWAY PENDANT TRIPLE hanging light set - Black - 3 x 7.1VA - 240v - w/white (360°)
Product Code: LIN8208
Dimensions of BASE 1: Ø of base 120mm; depth 50mm (approx.)
Dimensions: Ø of light head 85mm; length of stem 65mm; cable length 2.2m (approx.); human dimming compatible
IN-LITE® SWAY PENDANT TRIPLE hanging light set - Pearl Grey - 3 x 7.1VA - 240v - w/white (360°)
Product Code: LIN8408
Dimensions of BASE 1: Ø of base 120mm; depth 50mm (approx.)
Dimensions: Ø of light head 85mm; length of stem 65mm; cable length 2.2m (approx.); human dimming compatible