Brand Name
IN-LITE® DISC PENDANT Hanging Lights - 12v
Unhide your garden with in-lite®.
Utilising the same light engine as the DISC WALL lights, the low voltage DISC PENDANT hanging lights are a stunning way of softly lighting any outdoor dining table or seating area. For a playful and interesting lighting effect, multiple DISC PENDANT fixtures can be installed together at varying heights. This stylish fixture comes with a 2.2m long cable that can be easily shortened. The DISC PENDANT should preferably be hung in a windless spot. They are available with only a Black finish.
They are simple to install using the provided screws, cable grommet and BASE 1. Instructions for installation can be found on the PDF Installation Guide on this page. We also offer a DISC PENDANT TRIPLE kit for installation of three DISC PENDANT lights from a single base.
These low voltage pendant lights are compatible with the in-lite® TOUCH DIMMER wall switch which has a choice of 5 brightness levels that can be cycled through, ranging from full brightness to completely turned off.
There is also a mains voltage version of the DISC PENDANT hanging lights available. The 240v version does not require the in-lite® system and as such can be mixed and matched with other lights of your choosing. The mains powered version also features the in-lite® Human Dimming technology that enables dimming of the fixture using just the touch of your hands.
Each 12v in-lite® fitting features an LED with a 25,000 hour lifetime, giving you the peace of mind that they are built to last for years to come. They are covered under warranty for 5 years when used with the in-lite® system. Each light is supplied with one of their EASY-LOCK connectors for easily connecting to anywhere on the chosen in-lite® CBL 12v cable. The fitting is then easily connected to the EASY-LOCK using the push-fit connection. The cable length between the EASY-LOCK and the light fitting can be easily extended by up to 3m using the CBL-EXT cable extensions.
Note: When calculating the total transformer load within an in-lite® system it is crucial to add up the total VA rating rather than the wattage due to power losses. This VA load should not exceed the total stated on the chosen transformer.
Utilising the same light engine as the DISC WALL lights, the low voltage DISC PENDANT hanging lights are a stunning way of softly lighting any outdoor dining table or seating area. For a playful and interesting lighting effect, multiple DISC PENDANT fixtures can be installed together at varying heights. This stylish fixture comes with a 2.2m long cable that can be easily shortened. The DISC PENDANT should preferably be hung in a windless spot. They are available with only a Black finish.
They are simple to install using the provided screws, cable grommet and BASE 1. Instructions for installation can be found on the PDF Installation Guide on this page. We also offer a DISC PENDANT TRIPLE kit for installation of three DISC PENDANT lights from a single base.
These low voltage pendant lights are compatible with the in-lite® TOUCH DIMMER wall switch which has a choice of 5 brightness levels that can be cycled through, ranging from full brightness to completely turned off.
There is also a mains voltage version of the DISC PENDANT hanging lights available. The 240v version does not require the in-lite® system and as such can be mixed and matched with other lights of your choosing. The mains powered version also features the in-lite® Human Dimming technology that enables dimming of the fixture using just the touch of your hands.
Each 12v in-lite® fitting features an LED with a 25,000 hour lifetime, giving you the peace of mind that they are built to last for years to come. They are covered under warranty for 5 years when used with the in-lite® system. Each light is supplied with one of their EASY-LOCK connectors for easily connecting to anywhere on the chosen in-lite® CBL 12v cable. The fitting is then easily connected to the EASY-LOCK using the push-fit connection. The cable length between the EASY-LOCK and the light fitting can be easily extended by up to 3m using the CBL-EXT cable extensions.
Note: When calculating the total transformer load within an in-lite® system it is crucial to add up the total VA rating rather than the wattage due to power losses. This VA load should not exceed the total stated on the chosen transformer.
Specification
IN-LITE® DISC PENDANT hanging light - Black - 4.9VA - 12v - w/white (360°)
Product Code: LIN8212
Dimensions of DISC BASE: Ø of base 120mm; depth 50mm (approx.)
Dimensions of DISC PENDANTS: Ø 200mm; depth 36mm; cable length 2.2m (approx.)
Compatible with in-lite® TOUCH DIMMER.
Product Code: LIN8212
Dimensions of DISC BASE: Ø of base 120mm; depth 50mm (approx.)
Dimensions of DISC PENDANTS: Ø 200mm; depth 36mm; cable length 2.2m (approx.)
Compatible with in-lite® TOUCH DIMMER.
Login